Make your Own Wire Stars Earrings Jewelry

This is just basic how to Make your Own Wire Stars Earrings Jewelry.
There are two techniques that are involved in making these three stars. The first is to make the basic wire component by wrapping 18 or 20 gauge wire around pegs on the jig. The second technique is to use very fine wire (24 or 26 gauge) to wrap around the larger wire setting the shape in place.


Jewelry Supplies:



Tools Required:

* Ten inches of 16, 18 or 20G wire per star (1/2 hard wire will work best if available.)
* 12 inches of 24G or 26G wire



* Round Nose Pliers
* Flush Cutter
* Chain Nose or Bent Chain Nose Pliers
* Nylon Jaw Pliers
* WigJig Cyclops or Electra with 5-12 metal pegs.

Continues Reading for the next technique HERE

This is just basic how to Make your Own Wire Stars Earrings Jewelry.
There are two techniques that are involved in making these three stars. The first is to make the basic wire component by wrapping 18 or 20 gauge wire around pegs on the jig. The second technique is to use very fine wire (24 or 26 gauge) to wrap around the larger wire setting the shape in place.


Jewelry Supplies:



Tools Required:

* Ten inches of 16, 18 or 20G wire per star (1/2 hard wire will work best if available.)
* 12 inches of 24G or 26G wire



* Round Nose Pliers
* Flush Cutter
* Chain Nose or Bent Chain Nose Pliers
* Nylon Jaw Pliers
* WigJig Cyclops or Electra with 5-12 metal pegs.

Continues Reading for the next technique HERE